共 46 款产品 · 传动技术与轴连接
VAROLASTIC® highly 弹性 法兰联轴器 with progressive torsional stiffness
VAROLASTIC is a sturdy series of highly 弹性 法兰联轴器 which is a particularly good choice for variable-speed main drives due to their progressive torsional stiffness..
扭矩传感器
DATAFLEX and MONITEX BT 扭矩传感器 by KTR 系统 DATAFLEX dual-range 扭矩 传感器 Precise 扭矩 传感器 in 11 sizes for measuring ranges from 10 - 20000 Nm.
扭矩限制器 / 过载联轴器
What are mechanical safety 联轴器 used for? The mechanical safety 联轴器 is also referred to as 扭矩 limiter or overload 联轴器.
TOOLFLEX® metal bellow-type 联轴器
The TOOLFLEX is a metal bellows 联轴器 that is 零背隙, 扭力 stiff and 弹性 – as an all-metal 联轴器 with a stainless steel bellows.
SYNTEX®-NC 零背隙 safety 联轴器
The SYNTEX-NC 零背隙 safety 联轴器 are 过载联轴器 with a low weight and mass moment of inertia.
SYNTEX® 零背隙 safety 联轴器
The SYNTEX safety 联轴器 are 过载联轴器 with positive-locking operation for torques up to 400 Nm.
钢片联轴器 / 膜片联轴器
The steel laminae sets of our 膜片联轴器 were developed based on FEM calculations.
SINULASTIC® Highly 弹性 法兰联轴器
SINULASTIC is a modularly structured series of highly 弹性 法兰联轴器 based on a disk-shaped 联轴器 body.
RUFLEX® 扭矩限制器
The RUFLEX 扭矩 limiter provides for load-holding, frictionally engaged overload protection. When the 扭矩 set is exceeded, the drive element slips.
ROTEX® 扭力弹性爪形联轴器
ROTEX® 扭力弹性爪形联轴器
ROTEX® GS 型 零背隙 伺服联轴器
ROTEX GS is a three-part servo 联轴器 零背隙 under prestress (elastomer 联轴器).
ROFLEX® fail-safe 轴联轴器
Completely new with the renowned 联轴器 acc.
RIGIFLEX®-N 钢片联轴器
The RIGIFLEX-N 钢片联轴器 are used wherever reliable and 零背隙 扭矩 transmission with simultaneous 轴 displacement is required.
Rigid 轴 联轴器
精密万向节 consist of a joint centre piece and two hub bodies connected by straps.
REVOLEX® 弹性 pin & bush 联轴器
Safe 扭矩 transmission via REVOLEX pin & bush 联轴器 REVOLEX are 扭力 弹性 , fail-safe 销钉弹性套联轴器 mainly used in applications with high torques and drives subjected to shocks.
RADEX®-NC 零背隙 servo 膜片联轴器
The set of 扭力 stiff steel laminas 弹性 in bending offsets axial, angular and radial 轴 displacements.
RADEX®-N 钢片联轴器
All-steel 联轴器 with laminae sets made of high-strength and stainless spring steel.
pump mounting flange
For mounting 液压 pumps to the diesel engine KTR supplies mounting flanges sizes SAE-1 to SAE-6 according to the SAE mounting dimensions.
精密万向节
精密万向节 in various designs acc.
POLY-NORM® 扭力 弹性, fail-safe 轴联轴器
The POLY-NORM 轴联轴器 are characterized by their compact design.
POLY-NORM®-M 扭力 弹性, fail-safe 轴 联轴器
轴 联轴器 for high torques and large 轴 diameters The 扭力 弹性 , fail-safe 轴 联轴器 POLY-NORM-M is a three-part large 联轴器 mainly used in applications with high torques and drives subjected to shocks .
MONOLASTIC® One-piece, 弹性 法兰联轴器
The MONOLASTIC 联轴器 is a 弹性 flange 联轴器 enabling compensation of radial and angular displacements with severely low restoring forces through the elastomer part.
MINEX®-S 磁力联轴器 with containment shroud
The 磁力联轴器 of the MINEX range are permanent-磁力联轴器 transmitting the 扭矩 without contact through magnetic forces between two magnetic rotors.
MINEX®H hysteresis 联轴器
The MINEX-H hysteresis 联轴器 transmits the 扭矩 from the driving to the driven element without contact via magnetic forces (wear-free 扭矩 transmission).
磁力联轴器
The 磁力联轴器 of the MINEX range are permanent-磁力联轴器 transmitting the 扭矩 without contact through magnetic forces between two magnetic rotors.
KTR-SI 过载联轴器
The KTR-SI 过载联轴器 are 扭矩限制器 available in various types of engagement (DK or SR, automatically engaging and FR load-separating, idle rotation) and designs (overload 联轴器 with flange types or in combination with ROTE
KTR-SI FRE Idle rotation overload 联轴器
The core of the 过载联轴器 (safety 联轴器) is formed by the idle rotation elements.
KTR-SI FRA idle-rotation 过载联轴器
The KTR-SI FRA is a idle rotation overload 联轴器 with automatic re-engagement that reliably uncouples the drive train in the event of overload, thus protecting against expensive damage.
KTR-SI Compact 零背隙 safety 联轴器
safety 联轴器 in various designs: Our range of KTR-SI Compact safety 联轴器 comprises the 零背隙, load-separating safety 联轴器 as a flange type (KTR-SI Compact FT) and with 零背隙 伺服联轴器 (KTR-SI Compact with R
Highly 弹性 轴联轴器
Highly 弹性 轴联轴器 are suitable for offsetting high axial, radial and angular displacements and damping vibrations and 扭矩 shocks.
GEARex® all-steel 齿式联轴器
GEARex all-steel 齿式联轴器 with grease lubrication and O-ring seals comply with the international standard.
齿式联轴器 / 弧齿联轴节
Our 扭力 stiff 齿式联轴器 operate according to the curved-tooth gear principle.
弹性 爪形联轴器 and 销钉弹性套联轴器
扭力弹性爪形联轴器 and 销钉弹性套联轴器 are suitable to offset axial, radial and angular displacements and dampen vibrations and 扭矩 shocks.
法兰联轴器
Mobile machines mainly use I.
EVOLASTIC® highly 弹性 联轴器
EVOLASTIC is a highly 弹性, non-slip and 零背隙 轴 联轴器 and flange 联轴器 for versatile use in a large number of main and auxiliary drives in mechanical and plant engineering.
COUNTEX® 轴 encoder 联轴器
COUNTEX is a three-part, 零背隙 and 扭力 stiff 轴 encoder 联轴器.
夹紧连接套
CLAMPEX 夹紧连接套 (夹紧 elements) enable 零背隙 and frictionally engaged connection between cylindrical shafts without keyway and hubs.
夹紧 nuts
Large screw 连接 can simply be manually prestressed via KTR 夹紧 nuts (use of common 扭矩 keys up to approx.
CLAMPEX® internal 夹紧连接套
CLAMPEX® internal 夹紧连接套 enable 零背隙 and frictionally engaged connection between cylindrical shafts without keyway and hub bores.
CLAMPEX® External 夹紧连接套
CLAMPEX external 夹紧连接套 (shrink disks) enable 零背隙 and frictionally engaged connection between cylindrical shafts without keyway and hollow shafts.
BoWex® 扭力 stiff 法兰联轴器
BoWex FLE-PA and BoWex FLE-PAC are 扭力 stiff curved-tooth 法兰联轴器.
BoWex-ELASTIC® highly 弹性 法兰联轴器
The BoWex-ELASTIC 法兰联轴器 are highly 弹性 联轴器 combining the benefits of the renowned BoWex 系统 with the elasticity of a highly 弹性 联轴器 in a compact design.
BoWex® HEW Compact: highly 弹性 轴-to-轴 联轴器
The curved-tooth gear 联轴器 BoWex HEW Compact is a highly 弹性 轴-to-轴 联轴器..
BoWex® 弧齿联轴节
BoWex 弧齿联轴节 are 弹性 轴 连接 for positive-locking 扭矩 transmission and particularly suitable for offsetting axial, radial and angular 轴 displacements.
零背隙 伺服联轴器 / 轴联轴器
Our 伺服联轴器 are 零背隙, maintenance-free 轴联轴器 serving as a connection element between highly dynamic servo motors and any kind of positioning/handling units.
零背隙 safety 联轴器
Designing of our safety 联轴器 is based on 零背隙, positive-locking ball engagement principles allowing for high repeatability and short response times throughout the entire service life.